3. INSTALLATION
2.2 OWNERSHIP
7
NOTE: climate class is specified in ISO 23953-2.
Before you start to install your IMBERA unit, carefully inspect it for freight damage. If
damage is discovered, immediately file a claim with the delivery freight carrier.
IMBERA is not responsible for damage incurred during shipment.
Climate classification
IMBERA coolers are designed to work according to certain ambient temperatures.
Check your cooler’s classification on the corresponding serial number label (see page
6). Cooler operation is not recommended under temperatures above indicated as this
may create high energy consumption levels.
See table below to identify your cooler’s operation temperature.
Install this unit away from direct sunlight.
Do not install this unit outdoors.
This unit must not be used or stored where ambient temperature is under 14°F or
greater than 140°F or where relative humidity is greater than 90%.
Never install equipment close to heat sources; otherwise, unit may consume more
energy or function incorrectly.
Do not introduce objects that are hot or warmer than ambient temperature inside
unit.
Never obstruct or place objects along front grill which may obstruct free air flow;
this may cause inefficient unit operation and will increase the energy consumption.
To Next Page
Loading...