USER’S MANUAL
14
3.3 TURNING ON THE UNIT
4. HOW TO USE THIS UNIT
4.1 STORING PRODUCT INSIDE COOLER
If a floor shelf is included (Type A, B,
C, D), place it directly inside unit, and
right after that, place shelves (Type
E, F, G), using metallic clips (make
sure they are aligned at the same
height). If a floor shelf is not included
use clips to place a shelf (see pages 9
and 10).
If the unit has a plastic rack included,
it includes supports for each grill,
without using metal clip.
If the unit has been turned off and it
is necessary to turn it on, wait for at
least one hour to cool the interior of
the unit before introducing product.
When the unit is filled up, arrange
and order product inside; do not
throw or drop product when placing it
inside as that action will damage
interiors and shelves.
After having transported and installed the unit, let it stand for at
least twelve hours to allow compressor oil to fully settle.
Once the installing instructions have been followed, connect the unit per electrical
specifications indicated on serial number label (placed inside cabinet).
For your own safety, avoid touching the device with wet or damp hands or feet.
You should not handle unit when barefoot.
To Next Page
Loading...