USER’S MANUAL
4
This unit contains a charge of refrigerant at a pressure determined by the type
of refrigerant used and the internal volume. The installation and welding of the
piping should be treated by a service technician authorized by Imbera who is
properly trained in the use and management of refrigerants.
Never stack two or more units; leveling feet are not designed for this purpose,
and doing so compromises use safety. Stacking of one unit, only, on top of the
same model is approved if using pods, skids or pallets, and supported by the
cabinet corners only.
Refrigeration system on this unit must not be damaged or manipulated by
untrained personnel.
To Next Page
Loading...