To Next Page

To Previous Page

MISTRAL M60, M90, M135 AND TC60 13

CHANGING THE LIGHT BULB AND STARTER TC60

For the Mistral TC60 the cabinet interior is illuminated by a fluorescent tube

located at the front of the right-hand inner side panel. The starter for the tube is

located at the top of the light cover. The light switch for the tube is located at the

top front corner of the right-hand inner side panel.

To change the starter:

· Open the front cabinet door(s).

· Ensure the light switch is in the off position.

· The starter can be seen protruding through the light cover.

· Rotate the starter anticlockwise and remove

· Fit a new starter and rotate clockwise to secure.

To change the tube:

· Remove the starter as described above.

· Pull out all the light cover clips and remove the light cover.

· Rotate the tube by 90° and gently pull it downwards.

· Place a new tube in the tube end caps and rotate by 90° to secure.

· Refit the light cover and push in the light cover clips.

· Replace the starter as described above.

Other manuals for IMC MISTRAL 13 Series

Questions and Answers:

Need help?

Do you have a question about the IMC MISTRAL 13 Series and is the answer not in the manual?

General