MISTRAL M60, M90, M135 AND TC60 7
NYLON BUSH
· Unscrew the fixings retaining the door handle and the hinge pin.
· Remove the door handle.
· Refit the door handle on the right hand side of the door and screw in the
handle fasteners.
· Apply one drop of Loctite Studlock 270 to the hinge pin thread.
· Refit hinge pin on the left hand side of the door.
· Remove the Nylon bush which is located on the underside of the door and
push it into the hole on the left hand side.
To Next Page
