Turn the lever upwards, until you hear the “click “of release.
ATTENTION!
When the motorized closure is released manually, when the electrical energy is restored, perform the closure
realignment procedure.
ATTENTION!
Before supplying energy to the machine again, all protections must be reassembled in the original position!
In the case of machines with impulse closure and rotary handle, proceed as follows:
For high spin washing machines with a load capacity between 14 kg and 32 kg and for non high spin washing
machines with a load capacity between 14 kg and 30 kg, open the bottom cover, locate the cord on the left
side and pull it down. At the same time, turn the handle clockwise and open the door.
To Next Page
Loading...