The main switch, when in position "1", electrically powers the machine.
When the main switch is in the "0" position, the machine is electrically unit powered.
ATTENTION!
The openings for the passage of air in the backrest and possibly on the lid of the machine must always remain
free. The passage of air through the slits must not be in any way limited!
ATTENTION!
In the case of use of an aseptic machine, the requirements for proving the effectiveness of disinfection must be
defined by the laundry manager.
17. PREPARING THE GARMENTS
The machine must be loaded according to the characteristics on the serial label: it must not be loaded with a
weight greater than the nominal load provided for by the technical sheet and the serial number plate.
Before deciding on the most appropriate program, divide the linen according to the fabrics and fibers, to achieve
a uniform washing of the entire load.
Before loading, make sure that the garments bear the age with the authorization to wash in the machine and
always follow the instructions of the fabric manufacturer.
Here we recall the meaning of some example international symbols:
To Next Page
Loading...