Imesa RC30 - Machine Identification

E190601X rev.6_ENG May 30, 2022
9
6. MACHINE IDENTIFICATION
The equipment is identifiable by an adhesive plate bearing the serial number, model, power, and technical
characteristics: it is positioned on the back.
Make sure that the power supplies present (electrical, hydraulic, steam, compressed air) correspond to the
license plate data.
Spare parts and / or interventions presuppose the exact identification of the model for which they are intended.
Tampering, removal, lack of identification plates or anything else that does not allow the safe identification of
the machine, makes any installation and maintenance operation difficult and automatically voids the warranty.
The washing machines described here are intended exclusively for water washing of fabrics and are intended
for commercial, professional and industrial sectors.
MODELS AND MAXIMUM LOAD CAPACITY
MODELS AND MAX LOAD CAPACITY
SUPERCENTREFUGEES / HIGH SPIN: S...
CENTRIFUGES / LOW SPIN: R...
TANDEM: O...
ASEPTIC / ASEPTIC BARRIER: H...
CAPACITA'
DI CARICO
/ LOAD
CAPACITY
(Kg)
S8 – R8
8 Kg (*)
S11 – R11 – O11
11 Kg (*)
S14 – R14
14 Kg (*)
S18 – R18 – O18
18 Kg (*)
H18
18 Kg
S23 – R23
23 Kg (*)
H 23
23 Kg
S26
26 Kg (*)
R30
30 Kg
H30
30 Kg
S32
32 Kg
S40 – R40
40 Kg
S55 – R55 -
55 Kg
H55
55 Kg
S70 – R70
70 Kg
S85 – R85
85 Kg
S100
100 Kg
S125
125 Kg
Models with capacities marked with (*) can be produced and equipped for installation in self-service stores
with coin, token or other automatic payment systems. For some machines the heating system is hot water
served.
7. INDICATIONS ON SOUND EMISSION
The airborne noise produced by the machine produces an A-weighted continuous sound pressure level of less
than 72 dB.
8. FIXING TO THE GROUND
Suspended super-fire-aging machines with a capacity of up to 32 kg does not need to be fixed to the ground.
They are supplied with rubber feet that must be screwed to the relative threaded holes on the base.
Poor adjustment of such feet can give rise to strong vibrations of the external structures of the machine. The
machine must therefore be perfectly installed in a bubble on a floor that has no elastic reaction.
Suspended super centrifuge machines with capacities from 30 kg upwards, must instead be fixed to the ground
with dowels through the through holes in the bases. Machines must be installed perfectly in a bubble on a floor that
has no elastic reaction.