IMET BS 350 GH - User Manual

TRADUCTION OF THE ORIGINAL INSTRUCTIONS FOR USE
BS350 GH, BS400 GH autocut ED.2010 rev.01
1/64
IMET Spa
Loc. Tre Fontane - Cisano Bergamasco
Tel. 035/4387911 - Fax. 035/787066
Web site: www.imetsaws.com
E -mail: imet@imetsaws.com
Band Sawing Machine
BS 350 GH , BS400 GH -autocut-
INSTRUCTIONS FOR USE

Summary

1.1 - ATTACHED DOCUMENT FOR E.M.C. (INDUSTRIAL ENVIRONMENT)

CE DECLARATION OF CONFORMITY

IT IS IN COMPLIANCE WITH THE DIRECTIVES

HARMONIZED STANDARDS REFERENCE

6 - TECHNICAL CHARACTERISTICS BS 350 GH

6 A - TECHNICAL CHARACTERISTICS BS 4000 GH

7 - INSTALLATION

E.M.C. - Electromagnetic noise

10 - BAND CHOICE

11. INSTRUCTIONS FOR USE AND WARNINGS

SEGNALI DI AVVERTIMENTO E PERICOLO - SAFETY SIGNS

11.1 OPERATORS SAFETY

11.2.1. ELECTRIC EQUIPMENT - Norm EN 60204-01

11.2.2 PROTECTION AGAINST ACCIDENTAL CONTACTS

Describes physical protections to prevent accidental contact.

13 - MACHINE SETTING FOR STARTING

13.1 - COOLING SYSTEM

13.2 - ELECTRICAL CONNECTION

Guidelines for connecting the machine to the electrical supply.

14 - BAND TENSION

15 - DESCRIPTIONS OF CONTROLS

15.1 - CUTTING OPERATIONS

Explains how to perform cutting operations with the machine.

15.2 - LOCKING; EMERGENCY LOCKING

15.5 - OVERLOAD PROTECTIONS

16 - ADJUSTMENTS FOR BAND SAWING MACHINES BS 350 GH BS 400 GH

Check of the perpendicularity between blade and worktable

CUTTING SPEED

How to adjust cutting speed based on material and conditions.

17 - MAINTENANCE FOR THE USER

17.1 - PERIODICAL INTERVENTATIONS

Details daily, weekly, monthly, and yearly maintenance tasks.

17.2 - BAND SUBSTITUTION

Step-by-step guide for replacing the saw blade.

21 - DEFECTS IDENTIFICATION

21.1 - DEFECTS CAUSED BY THE MACHINE

Lists machine-related defects and their causes.

21.2 - DEFECTS OF THE BAND; CAUSES; SOLUTIONS

24 - MAINTENANCE - for skilled personnel

IMET BS 350 GH Specifications

General

Brand	IMET
Model	BS 350 GH
Category	Saw
Language	English