IMET SIRIO 315 - User Manual

TRADUCTION OF THE ORIGINAL INSTRUCTIONS FOR USE
SIRIO315+315 SH eng ED.2011 rev.00 1/41
IMET Spa
Loc. Tre Fontane - Cisano Bergamasco
Tel. 035/4387911 - Fax. 035/787066
Web site: www.imetsaws.com
E-mail: imet@imetsaws.com
Metal Cutting Circular Saw with vertical column :,
manual type SIRIO 315,
semiautomatic–hydropnematic type Sirio 315 SH
USER’S INSTRUCTIONS

Summary

EC Declaration of Conformity

Machine Noise Levels

Warranty Information

Technical Specifications and Cutting Capacity

Machine Installation

Differential Protection Setup

Details on setting up differential protection for the power supply line.

EMC Electromagnetic Noise

Considerations for electromagnetic compatibility in industrial environments.

Machine Transport and Lifting

Machine Fittings and Accessories

Selecting the Correct Blade

General Operating Instructions and Warnings

Operator Safety Guidelines

Electrical Equipment Safety Standards

Safety standards for electrical equipment conforming to EN 60204-01.

Protection Against Accidental Contact

Measures for preventing accidental contact with moving parts.

Working Area Lighting Requirements

Recommendations for adequate lighting in the working area.

Machine Description and EC Safety Norms

Initial Machine Setup

Cooling and Lubrication System Setup

Instructions for preparing the cooling and lubrication system.

Pneumatic Connection Requirements

Electrical Connection Requirements

Machine Starting Procedure

Cutting Setup and Parameters

Setting up the machine for cutting operations.

Emergency Stop and Machine Stopping

Procedures for using the stop device and emergency stop.

Mitre Cutting Head Rotation

Motor Overload Protection

Sirio 315 Adjustments

Vice Adjustment Procedure

Steps for adjusting the vice and its components.

Cutting Head Adjustment Procedure

Procedure for adjusting the cutting head and its guides.

User Maintenance Schedule

Periodic Maintenance Schedule

Daily, weekly, and monthly maintenance tasks for the user.

Blade Running-In Procedure

Machine Running-In Procedure

Disposal of Used Substances

Troubleshooting: Defect Identification

Machine-Caused Defects and Checks

List of common machine defects and their corresponding checks.

Blade Defects, Causes, and Solutions

Machine Demolition Procedures

Ordering Spare Parts

Spare Parts Request Procedure

Information required when requesting spare parts from technical service.

Lubricants and Oils Table

Qualified Technician Maintenance

Electrical Schematics Diagrams

Detailed electrical diagrams for maintenance purposes.

Pneumatic and Hydro-pneumatic Diagrams

Diagrams of pneumatic and hydro-pneumatic circuits.

Spare Parts Exploded Views

Exploded view drawings for identifying spare parts.

IMET SIRIO 315 Specifications

General

Brand	IMET
Model	SIRIO 315
Category	Saw
Language	English