IMET Perfect 250 - User Manual

TRADUCTION OF THE ORIGINAL USER INSTRUCTIONS
PERFECT 250-275-300eng ED.2010 rev.00
1/40
IMET Spa
Loc. Tre Fontane - Cisano Bergamasco
Tel. 035/4387911 - Fax. 035/787066
Web site: www.imetsaws.com
E-mail: imet@imetsaws.com
Manual Metal Cutting Circular Saws ,
Perfect 250 - Perfect 275 – Perfect 300
USER’S INSTRUCTION

Summary

Technical Characteristics

Installation and Transport

Installation Requirements

Blade Choice and Assembling

Blade Choice Guidelines

Blade Mounting Procedures

Detailed steps for securely mounting the saw blade onto the spindle.

Instructions for Use and Warnings

General Use and Safety Guidelines

Key operational instructions, safety warnings, and PPE recommendations.

Machine Operation

Starting Procedures and Controls

Step-by-step guide for starting the machine and using its controls.

Cutting Settings and Safety Stops

Cutting Parameters and Procedures

Guidance on cutting settings, clutch use, and stop procedures.

User Maintenance and Running-In

Routine Maintenance Tasks

Running-In Procedures

Troubleshooting and Spare Parts

Defects Identification and Solutions

IMET Perfect 250 Specifications

General

Brand	IMET
Model	Perfect 250
Category	Saw
Language	English