IMET HYDRA - Receiver Check

TROUBLE SHOOTING RX
RX
Receiver check
ANOMALY
(if it occurs at 1° use only)
A
NOMALY POSSIBLE SOLUTION
The receiver does not
turn on
The receiver does not turn
on
• Check the fuses
•
Check the
p
ower lines
p
The receiver turns on but the
machine do not react. The
two yellow Leds are on.
• Check the fuse protecting the common of the motion relays
• Check the wiring between the receiver and the machine
•
Check
the
fuse
protecting
the
STOP
circuit
relays
•
Check
the
fuse
protecting
the
STOP
circuit
relays
The receiver turns on but
the machine does not
react. The two red Leds
are on.
• Check if the radiocontrol operation range is normal
• Check the radiocontrol ID trough the serial number (TX and RX
ID
must
match)
ID
must
match)
The receiver turns on but the
machine do not react. The
two red Leds are on.
• Check if the radiocontrol operation range is normal
Some commands are not
•
Check
the
wiring
between
the
receiver
and
the
application
executed
•
Check
the
wiring
between
the
receiver
and
the
application
Some commands are not
executed
any
more
• Check the wiring between the receiver and the application
16
executed
any
more
• Check if the commands cards, in the receiver, are correctly
working.