IMET HYDRA - Introduction: Glossary

TROUBLE SHOOTING
Introduction: Glossary
Passive Emergency Stop concept
In case of system failure, the radio control automatically gets into safe status mode. At the
receiver all outputs are de
-
energized and the STOP circuit opened The most common
receiver
,
all
outputs
are
de
-
energized
and
the
STOP
circuit
opened
.
The
most
common
cause is an interruption of the radio transmission ( for
>0,8s) because of:
• strong radio interferences: another radio control is being operated nearby at the same
frequency
• The action range has been exceeded or a metallic surface is present between the
transmitter and the receiver.
TX RX
TX
,
RX
TX = transmitter, RX = receiver
Eeprom
Removable memory card containing information like ID number, channel frequency and
system settings (can be intended as a mobile phone SIM card).
Frequency Change (C F )
4
Frequency
Change
(C
.
F
.
)
It can be performed by the operator entering a procedure directly from the transmitter. This
will allow to set a specific frequency for the radio link. 30 different channels are available.