IMET HYDRA - TX LED Indications Part 3

TROUBLE SHOOTING TX
TX
Transmitter
Led status
Description
TX led. Meaning of Indications Part3
Led
status
Description
ON
____________________________
Transmitter is working correctly
flashin
g
with
g
rou
p
s of 5 flashes Fre
q
uenc
y
Chan
g
e
p
rocedure has been succesfull
y
g
gp
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _
qy
g
p
y
entered at the TX. Waiting for the new channel selection
(Only for systems with proportional
commands and PIN code)
Analogue output calibration procedure has been
successfully entered. Waiting for the PIN code
Flashing regularly
Es: _ _ _ _ _ _ _ _ _ _ _ _ _
(Only for systems with proportional
commands
and PIN code)
Analogue output calibration procedure in progress.
Minimum
speed
limit
calibration
commands
and
PIN
code)
Single flash with pause
Es: _ _ _ _ _ _ _ _
Minimum
speed
limit
calibration
.
(Only for systems with proportional
commands
and PIN code)
Analogue output calibration procedure in progress.
Maximum
speed
limit
calibration
commands
and
PIN
code)
Double flash with pause
Es: _ _ _ _ _ _ _ _ _ _ _ _ _ _
Maximum
speed
limit
calibration
.
(
Only
for
systems
with
proportional
Analogue
output
calibration
procedure
in
progress
8
(
Only
for
systems
with
proportional
commands and PIN code)
Rapid regular flashes
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Analogue
output
calibration
procedure
in
progress
.
Direction change