Need help?Do you have a question about the IMG STAGE LINE SAM-300D and is the answer not in the manual?
General| Brand | IMG STAGE LINE |
|---|---|
| Model | SAM-300D |
| Category | Amplifier |
| Language | English |
Connect audio source via line level (RCA) or speaker outputs (HIGH LEVEL INPUT).
Route the input signal to another amplifier or speaker system via LINE OUT.
Connect the mains cable to the module and a mains socket (230 V~/50 Hz).
Set LEVEL to minimum, switch on, and check the LED status (red/green).
Adjust LEVEL for optimal bass reproduction without distortion.
Use CUT OFF to set the crossover frequency for integration with main speakers.
Adjust PHASE to align subwoofer output with main speakers.
Module enters standby automatically; switch off for long periods.
To Next Page