Need help?Do you have a question about the Immergas NIKE Star 23 kW and is the answer not in the manual?
General| Power Output | 23 kW |
|---|---|
| Mounting | Wall-mounted |
| Heat Output | 23 kW |
| Max Water Temperature | 80 °C |
| Type | Condensing |
| Fuel Type | Natural Gas / LPG |
| Combustion Type | Closed chamber |
| Noise Level | 50 dB |
Boiler for heating and domestic hot water, microprocessor controlled.
Technical drawings and connection types with dimensions.
Diagram and list of internal components of the boiler.
Description of the boiler's user interface, buttons, and indicators.
Explanation of the central heating circuit operation and heat transfer.
How the boiler produces domestic hot water.
Details on the function and operation of the boiler's pump.
Explanation of the bithermal exchanger for heating and domestic hot water.
Graph showing head vs. flow rate for central heating mode.
Automatic by-pass, pressure switch, filling valve, safety valves, air vent, expansion vessel.
How the boiler operates for domestic hot water (DHW) production.
Detects hot water draw to activate DHW mode.
Details on the exchanger for DHW and heating, recommends scale prevention.
How gas flows to the burner and is mixed with air.
Controls gas flow and pressure, includes main and modulation coils.
Description of the burner assembly, ignition, and detection electrodes.
Procedure to set maximum and minimum gas pressure.
Procedure for adapting the boiler to different gas types.
Wiring diagram for the main 230V AC components.
Description of safety devices operating at low voltage.
Ignition electrode, circulator, integrated board, gas valve.
Details on remote control, flow switch, pressure switch, and reset button.
Using the functioning button (S2) for mode selection.
Delivery (B1) and DHW (B2) probes for temperature measurement.
Flue safety (E6) and Safety (E4) thermostats for protection.
Controls gas pressure for burner modulation.
Wiring diagram for central heating operation sequence.
How the room thermostat interacts with central heating.
How the remote control panel manages central heating.
Wiring diagram for domestic hot water (DHW) operation sequence.
How the boiler operates for DHW, including circulator and ignition.
Microprocessor board controlling appliance functions and modulation.
Step-by-step sequence for initiating central heating operation.
Sequence for initiating domestic hot water operation.
How the boiler prevents freezing in CH and DHW circuits.
Operation for the chimney sweep function.
Signals from optional remote control and other inputs.
DHW flow switch, pressure switch, flame detection, probes, room thermostat, flue thermostat.
Signals to gas valve, ignition electrode, modulation coil, relays.
Circulator antiblock and electromechanical contacts block functions.
Parasite flame, no ignition, and flue safety thermostat blocks.
Safety thermostat, insufficient circulation, and probe breakage blocks.
Circulator runs after specific requests to prevent overheating.
Display symbols indicating boiler status and functioning mode.
Table of malfunctions, flashing codes, and display illumination colours.
Associates push buttons with functions and parameters.
Procedure to access and modify boiler operating parameters.
Configuration for solar panels and selecting gas type.
Settings for CH power, ignition timers, and ramp timers.
Functions for anti-leak and post-DHW circulation.
Step-by-step sequence for central heating operation.
Step-by-step sequence for domestic hot water operation.
Detailed technical specifications and performance data.
Data on variable heat output for different gas types.
To Next Page