Need help?Do you have a question about the Immergas EOLO STAR 24 4E and is the answer not in the manual?
General| Power Output | 24 kW |
|---|---|
| DHW Output | 24 kW |
| Weight | 32 kg |
| Max working temperature | 85 °C |
| Electrical connection | 230 V / 50 Hz |
| NOx emissions | Class 5 |
| Fuel Type | Natural Gas |
| Heating Output | 24 kW |
| Nominal output range | 6.7 - 24 kW |
Outlines safety precautions for installers and users, emphasizing professional installation and limited user operations.
Stresses the need for qualified personnel, adherence to regulations, and product handling.
Explains various safety symbols used in the manual for hazard identification and understanding.
Lists essential personal protective equipment (PPE) required for safe operation.
Provides crucial recommendations for safe installation, including boiler types and qualified company requirements.
Outlines mandatory installation standards, site restrictions, and environmental compliance.
Details the correct procedures and precautions for connecting the gas supply.
Explains the necessary steps and precautions for making hydraulic connections.
Covers essential requirements, safety measures, and earthing for electrical connections.
Describes optional remote controls, thermostats, and approved Immergas flue systems.
Step-by-step guide for installing the concentric horizontal flue kit.
Instructions for the proper installation of the concentric vertical flue kit.
Guidance on installing the separator kit for air intake and flue exhaust.
Step-by-step guide for filling the heating system and venting air.
Detailed checks and procedures for safely starting and igniting the boiler.
Key safety measures for operating the boiler, including electrical safety and temperature warnings.
Explains the control panel buttons, display, and basic operational modes (Summer/Winter).
Details the ignition process, summer/winter modes, stand-by, and solar operation.
A comprehensive list of error codes, their causes, and recommended solutions for troubleshooting.
Steps for safely shutting down the boiler and guidance on restoring system pressure.
Safety warnings for maintenance, PPE requirements, and precautions before starting work.
Essential checks to perform before commissioning the boiler for the first time.
Details the essential yearly checks and maintenance tasks for safety and efficiency.
A schematic illustrating the hydraulic layout and components of the boiler.
A schematic showing the electrical connections and components of the boiler.
Table detailing the boiler's heat output variations under different conditions.
Provides a guide to common problems, their causes, and recommended solutions.
Procedure for converting the boiler to different gas types and calibrating the gas valve.
Guide on how to access and modify various operating parameters via the PCB.
To Next Page