To Next PageTo Next Page
Need help?Do you have a question about the Immergas nike star 24 3 E and is the answer not in the manual?
General| Mounting | Wall-mounted |
|---|---|
| Power Output | 24 kW |
| Nominal output | 24 kW |
| Fuel Type | Natural Gas / LPG |
| Weight | 32 kg |
| Water pressure | 0.5 - 3 bar |
| Electrical connection | 230 V / 50 Hz |
| NOx emissions | Class 5 |
Boiler's compliance with European Community Directives.
Essential advice for installing the boiler safely and correctly.
Key physical dimensions of the boiler unit.
Procedures for connecting gas and water lines, including quality checks.
Crucial safety instructions for electrical installation and grounding.
Information on optional digital remote controls and chronothermostats.
Guidelines for adequate air supply for combustion and ventilation.
Proper installation and connection of fume ducts and chimneys.
Steps to fill the heating system with water, ensuring air removal.
Critical safety checks and steps for initial gas system operation.
A checklist of vital actions before igniting the boiler.
Instructions for releasing a blocked circulation pump.
Details on optional kits like shut-off valves and dispensers.
Labeled diagram for identifying all boiler components.
Guidelines for keeping the boiler clean and performing regular maintenance.
Important safety advice and warnings for everyday use.
Explanation of the control panel buttons, display, and basic operations.
Table detailing error codes and their associated anomalies for troubleshooting.
Explains causes and remedies for common boiler problems.
Procedure to check and restore correct water pressure in the heating system.
Steps for safely draining the boiler and heating system.
Information on the boiler's built-in protection against freezing.
Instructions for permanent shutdown by qualified personnel.
A comprehensive checklist for technicians before boiler start-up.
Labeled diagram illustrating the boiler's hydraulic layout.
Labeled diagram showing the boiler's electrical connections.
Identification and causes of common issues like gas leaks and combustion problems.
Steps to convert the boiler for different gas types.
How to adjust nominal, minimum, and maximum gas parameters.
Checks required after gas conversion to ensure correct operation.
How to enter the PCB programming mode.
Configuring parameters for solar panels and different gas types.
Setting anti-extruder and post-circulation functions for hot water.
How to set the boiler's heating power for optimal output.
Configuration of timers for ignition frequency and heating ramps.
Details on functions like chimney sweep, anti-block pump, and self-check.
Labeled diagram identifying parts of the gas valve.
Step-by-step guide for safely removing the boiler casing.
Essential annual checks for safe and efficient boiler operation.
