5-10 Selecting Functions
5
Min. Factory
Name Setting range unit setting
o00 Optional 0: Option inactive - 0 0
selection 1: Option active
Set 0 when optional card is not used
Function code
Change during
operation
RS485 Data format
User setting
Description of change during operation
: The data changed by the or key takes
effect on the inverter operation. However,
press the key to store the new data.
V
V
: Press the or key to change the data.
The new data takes effect after the key is
pressed to store the data.
X : The data can be changed only while the
inverter is stopped.
V
V
FUNC
DATA
FUNC
DATA
O: Optional functions
F00
To Next Page
Loading...
