Need help?Do you have a question about the IMO VXSM550-3 and is the answer not in the manual?
General purpose inverter specifications including single and three phase input.
Single phase input power and power range for the inverter.
Three phase input power and power range for the inverter.
General safety warnings and precautions for safe operation and handling of the inverter.
Defines the intended use and limitations of the VXSM inverter.
Instructions and warnings for safely installing the inverter on a nonflammable surface.
Critical safety warnings and precautions for electrical wiring of the inverter.
Safety guidelines and warnings for operating the inverter correctly and safely.
Safety precautions for maintenance, inspection, and replacement of inverter parts.
Cautionary advice on handling the inverter as industrial waste and general remodeling warnings.
Guidelines for EMC compliance and safety requirements for EU market products.
Specific safety cautions for products with UL/cUL certification.
Procedure for unpacking and inspecting the inverter for damage and correctness.
Identification of external components of the inverter for models up to 4.0kW.
Environmental conditions required for inverter installation and operation.
Guidelines for physically mounting the inverter and ensuring proper ventilation.
Pre-operation checks including wiring, short circuits, and component security.
Overview of different operation methods available for the inverter.
Procedure for performing a test operation to verify correct setup and motor rotation.
Identification and description of the keypad panel buttons and display elements.
Procedure for viewing alarm descriptions and historical alarm data.
Method for setting the output frequency using the keypad panel.
List of fundamental functions with their codes, settings, and operational parameters.
Explanation of data protection settings for preventing inadvertent operation.
Selection of methods for setting output frequency via keypad, voltage, or current input.
Functions assignable to digital input terminals X1 through X5 for multistep frequency selection.
Functions for managing jump frequencies and multistep frequency selection.
Parameters for configuring motor 1, including poles, capacity, current, and tuning.
Functions for monitoring operation time, trip history, and resetting parameters.
Parameters for configuring motor 2, mirroring motor 1 settings.
Comprehensive list of inverter alarms, their display codes, and descriptions of protective functions.
Troubleshooting guide for overcurrent protection, including OC1, OC2, OC3 alarms.
Troubleshooting steps for when the motor does not rotate or starts incorrectly.
Routine visual checks for errors, environment, keypad, and abnormal signs.
Procedures for detailed periodic inspection of various inverter components.
Technical specifications for single-phase 200V input models, including ratings and input/output parameters.
List and description of optional external components like circuit breakers, reactors, and surge absorbers.
List of DC reactors suitable for different inverter models and connection methods.
EMC compliance information and classification of VXSM inverters as complex components.
Instructions for installing filters and inverters to meet EMC directive requirements.
Details of the 5-year warranty coverage, repair, replacement, and service policies.
Statement regarding the accuracy and generality of installation information.
General| Input Voltage | 24V DC |
|---|---|
| Output Power | 550 W |
| Continuous Power | 550 W |
| Peak Power | 1100 W |
| Efficiency | 90% |
| Cooling | Fan cooled |
| USB Port | Yes |
| Output Voltage | 230 V |
| Output Frequency | 50 Hz |
| Protection Features | Overload, Short Circuit |
To Next Page
