IMOU F Series - Operation by Imou App

2
Note
To reset, long press for 10 seconds till the light is off; to enable WPS, just press the
button.
The following table shows more information about status of indicator light.
Indicator light status
Device status
Spinning red
 Booting
 Device malfunction
 Failed to boot up
Spinning green
 Booting completed
 Waiting for Wi-Fi configuration
Flashing yellow
 WiFi connection process.
 Device has been configured with WiFi,
but it failed to work normally.
Flashing green
WPS pairing
Blue light stably on
 Wi-Fi connection succeeded
 Operate normally
Flashing blue
Device upgrade
Flashing red
SD card malfunction.
Operation by Imou App 3
Step 1 Power on your camera with power adapter.
Step 2 Connect your smartphone to your Wi-Fi network, scan “Imou” QR on the
packing box, download and install Imou App.
Step 3 Run Imou App, and register account for first use.
Step 4 Follow the steps below to add your camera.