To Next PageTo Next Page
Need help?Do you have a question about the Impex WM 1403 and is the answer not in the manual?
Crucial safety guidelines and warnings for using the equipment.
Guide for identifying and matching hardware components by size.
Information on how to obtain replacement parts for the product.
Connect base frame, rear vertical beams, and rubber bumper.
Attach front upper and lower vertical beams using bolts and nuts.
Secure front lower beam, storage posts, and seat support to the base frame.
Mount weight holder, upper frame, and olympic sleeves.
Attach front press base, stopper, and butterfly pulley frame.
Connect leg developer and arm curl stand to the seat support.
Install butterfly arms and pulley brackets with bolts and nuts.
Route the upper cable through pulleys and attach to weight holder.
Route the butterfly cable through pulleys and brackets.
Route the lower cable through pulleys and connect to the chain.
Attach arm pads, backrest board, and seat pad to the frame.
Install foam rolls, handles, and lat bar for exercises.
Comprehensive list of all components with their key numbers and quantities.
Guide to understanding weight resistance ratios at different exercise stations.
Details the product warranty period, coverage, and limitations.
Instructions and contact information for ordering replacement parts.
General