Do you have a question about the Impex WM 1402 and is the answer not in the manual?
Instructions for attaching the base frame, rear stabilizer, and vertical beams.
Details on attaching the front press base and the press components.
Guide for assembling the seat support and leg developer unit.
Instructions for installing weight plates, selector rod, and air shock.
How to attach the right and left butterfly components and pulley brackets.
Guide for routing the upper cable through pulleys and frame.
Instructions for connecting butterfly cables and the single floating pulley bracket.
Steps for routing the lower cable, attaching pulleys, and connecting to the chain.
Guide for connecting the bench press cable through various pulleys.
Instructions for routing the power booster cable and connecting it to the selector rod.
Attaching seat, backrest, arm curl pad, foam rolls, and connecting chains.
Information on how to order replacement parts and necessary details.