Impex WM 1402 - Step 2: Front Press Base and Presses

STEP 2 (See Diagram 2)
A.) Attach the Front Press Base (#7) to the Base Frame (#1). Align the holes and insert through
a M10 x 9 5/8” Axle (#38). Secure the Axle with two ∅ ¾” Washers (#114) and M10 Aircraft
Nuts (#112).
B.) Attach the Front Presses (#6) to the Front Press Base (#7). Secure it with four M10 x 2 ½”
Carriage Bolts (#93), ∅ ¾” Washers (#114), and M10 Aircraft Nuts (#112).
DIAGRAM 2
5