EasyManuals Logo

impro technologies HRK901-0-5-GB Series User Manual

Default Icon
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
MDR300-0-0-GB-08
July 2015
Page 4
INSTALLATION INFORMATION
Accessories
Find the following when unpacking the Multi-discipline Reader:
Either an Impro (MDR) Multi-discipline Reader (MDR901-5-0-GB-XX/HRW900-5-0-
GB-XX) housed in an ABS Plastic and 304 Stainless Steel housing. The Multi-
discipline Reader consists of a Front Cover assembly and a Backing Plate (the
Backing Plate is attached with a Hexagonal Screw (M3 x 8 mm)).
Or an Impro (MDK) Multi-discipline Keypad Reader (MDK901-5-0-GB-XX/
HRW901-5-0-GB-XX) housed in an ABS Plastic and 304 Stainless Steel housing.
OR a Multi-discipline Junction Box Reader ((HRK900-0-5-GB-XX) / Multi-discipline
Junction Box Keypad Reader ((HRK901-0-5-GB-XX) housed in a Black, ABS
Plastic housing.
The Multi-discipline Reader consists of a Front Cover assembly and a Backing
Plate (the Backing Plate is attached with a Hexagonal Screw (M3 x 8 mm)).
One 2-Way Programming Pin.
An Allen Key (2 mm).
An extra Hexagonal Screw (M3 x 8 mm).
An extra Serial Number Label.
The Junction Box Reader consists of a Front Cover and a Backing Plate Assembly
(the Front Cover is attached with a Combi Screw (6 mm x 2.2 mm)). The Backing
Plate Assembly includes 1 m (3.28 ft) of 10-core, 6.2 mm cable.
One 2-way Programming Pin.
An extra Serial Number Label.
General
Remember the following when installing the Multi-discipline Readers:
Maximum Data Communications Distance
Install the Multi-discipline Readers no further than 150 m (164 yd) from the Host unit.
The cable individual conductor may be AWG 20 to AWG 22 cross-sectional area should
not be less than 0.644 mm
2
(0.0253 in
2
).
NOTE: You can expect a drop in read range on 13.56 MHz Tags if noise exists on
the Reader’s input supply. The following good wiring practices lessen noise
introduction: Use a well shielded cable with a drain wire, ensure connection
of the drain wire to a clean Earth point. Also, install cables away from high
voltage cabling and other noise (that is wireless equipment, machinery and
so on) sources.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the impro technologies HRK901-0-5-GB Series and is the answer not in the manual?

impro technologies HRK901-0-5-GB Series Specifications

General IconGeneral
Brandimpro technologies
ModelHRK901-0-5-GB Series
CategoryCard Reader
LanguageEnglish

Related product manuals