Impulse SL7046 - Page 23

Assembly
23
STEP 2
1. Attach the Left Arm Frame ASSY (#8) and the Right Arm Frame ASSY (#9) to the Left
Frame ASSY (#1) and the Right Frame ASSY (#2) using:
two Pivot Shaft Φ30 (#14)
four Φ54*Φ12.5*10.6 Aluminum End Cap (#19)
four M12*30 FHCS (#32)
2. Attach the Left Handle Frame ASSY (#10) and the Right Handle Frame ASSY (#11) to
the Left Arm Frame ASSY (#8) and the Right Arm Frame ASSY (#9) using:
two Pivot Shaft Φ25.4 (#12)
four Φ38*Φ10.5*8 Aluminum End Cap (#20)
four M10*30 FHCS (#33)
Note: Wrench Tighten Bolts and Nylon Lock Nuts.