26
Assembly
STEP 5
1. Attach four Foam Pad (#15) to two Foam Tube ASSY (#5) and the Swing Frame ASSY
(#13) using:
four Cap ASSY (#21) four Φ60*Φ26*12 Plastic Ring (#22)
four M10*35 SHCS (#28) two Socket Set Screw M8*10 (#34)
2. Attach the Seat Pad (#17) to the Main Frame ASSY (#4) using:
two M10*75 SHCS (#27) two Φ11*Φ23*2 Flat Washer (#37)
3 Attach the Back Pad (#16) to the Main Frame ASSY (#4) using:
two Plug Φ31.5*18 (#24) two M10*30 SHCS (#29)
two Φ11*Φ23*2 Flat Washer (#37)
Note: Wrench tighten bolts and Nylon Lock Nuts.
All equipment must be anchored to the floor to prevent movement and
increase stability.
To Next Page
Loading...
