25
Assembly
STEP 4
1. Attach the Swing Frame ASSY (#13) to the Main Frame ASSY (#4) using:
one Pivot Shaft Φ25.4 (#12)
two Φ38*Φ10.5*8 Aluminum End Cap (#20)
two M10*30 FHCS (#33)
one M8*25 SHCS (#30)
one Sleeve Φ17*10.5 (#23)
one Φ9*Φ16*1.6 Flat Washer (#38)
one M8 Nylon Lock Nut (#40)
2. Attach two Foam Tube ASSY (#5) to the Swing Frame ASSY (#13).
Note: Wrench Tighten Bolts and Nylon Lock Nuts.
To Next Page
Loading...
