14
A. Picture playing time and transition model from one picture to the next. Set as
follows:
Add below programme at the beginning of the configuration file “autoplay.txt”:
Transition=9 (Setting the transition model from one picture to another,
parameter range 1-13)
Slide time=5 (Setting the playing time of each picture)
B. Custom volume level
Define at the beginning of “autoplay.txt”, as below:
Volume=10 (Here “10” represents the boot volume level when power on.
Effective volume setting range is from 1 to 31.)
5.4 Custom function
First, define “irmode=1”at the beginning of “autoplay.txt”.
Format: [function key name]=[number key], this format should not be reversed.
For example, we define the keys “stop”, “return”, “next”, “prev” as below:
STOP=1, RETURN=3, NEXT=4, PREV=5
In this case, push button input 1, 3, 4, 5, they will be function keys.
The definable function keys are as follows ( it is for the definition of button keys):
NEXT, PREV, STOP, RETURN, PLAY, UP, DOWN, LEFT, RIGHT, SETUP,
MENU, VOL_PLUS, VOL_MINUS, MUTE
To Next Page
Loading...