Need help?Do you have a question about the IN-COMMAND NCSP35 and is the answer not in the manual?
General| Brand | IN-COMMAND |
|---|---|
| Model | NCSP35 |
| Category | Control Systems |
| Language | English |
Details all wiring connections required for proper operation of the Body Control Module (BCM).
Illustrates the RV-C system layout including ceiling/roof and floor components.
Lists BCM pins for tank level inputs and common voltage.
Details BCM pins for lighting groups and switch inputs.
Lists BCM pins for water heater and water pump connections.
Details BCM pin assignments for electric motor retraction and extension.
Lists BCM pins for main power input and RV-C communication.
Details BCM pins for auxiliary motor control functions.
Describes BCM power indicators, override switches, and buttons for motor control.
Explains BCM and DC communication and DC wake-up procedures.
Verifies HVAC zone display, temperature, and mode cycling.
Guides on using set temperature arrows for adjustment between 55-90F.
Addresses room temperature readings, blank zone temps, clinking sounds, and zone function issues.
Steps to resolve RV-C communication short circuits and connection issues.
Guides on troubleshooting no BCM power, no DC power, and motor movement failures.
Steps to troubleshoot water tank reading errors and voltage checks.
To Next Page
