Need help?Do you have a question about the Inateck FE2005 and is the answer not in the manual?
General| Brand | Inateck |
|---|---|
| Model | FE2005 |
| Category | Enclosure |
| Type | External Hard Drive Enclosure |
| Drive Size | 2.5 inch |
| Interface | USB 3.0 |
| Maximum Data Transfer Speed | 5 Gbps |
| Tool-free Installation | Yes |
| Operating System Compatibility | Windows, macOS, Linux |
| LED Indicator | Yes |
| Compatible Drive Type | 2.5 inch SATA HDD/SSD |
| Material | Plastic |
| Power Source | USB powered |
Visual overview of the enclosure's front and side, highlighting ports and features.
Toggle the switch to "unlocked" and slide the covers laterally.
Place the hard disk inside and align it with the SATA interface.
Push upwards to close the enclosure and connect it to the computer via USB.
Stop data access before removal to prevent damage or data loss.
Ensure hard drive capacity matches USB port output for normal function.
Reformat drives if system shows "New Disk" or does not recognize them.
The enclosure enters sleep mode automatically after 10 minutes of inactivity.
Contact information for Inateck Technology Inc. in the USA.
Contact information for F&M Technology GmbH in Germany.
Contact information for Inateck in Japan.
Details for F&M Technology GmbH, the product license holder.
Contact details for the product manufacturer, Shenzhen Licheng Technology Co., Ltd.
To Next Page
