Inateck FE2013 - Installing the Hard Disk; Closing the Enclosure; Connecting to Computer; Power On and Recognition

2
Product name Ultra slim 2.5 Inch HDD Enclosure
Product type Inateck FE2013
material ABS plastic
Weight 87g
Color black
UASP Supported
Supported drives interface SATAIII/II/I
Maximum height of drives Height of up to 9.5mm HDD/SSD supported
Product specications
b. Lay hard disk into enclosure with SATA interface aligned.
c. Close the enclosure as the picture displays.
d. Connect enclosure with computer by USB cable.
e. Switch on the enclosure and corresponding drive will
appear in le manager.
1
2