inbody 230 User Manual

Proper posture is essential to achieve reliable results and high reproducibility.
To minimize errors and improve reliability, keep the following in mind.
A. How to hold the hand electrodes
(1) Make parallel, flat contact with four fingers on the surface of the electrode.
(2) Place thumb on the electrode pad on the top surface of the handle. Touch lightly, do
not press with nails, and do not press down too hard.
(3) When holding the grips, make sure your thumbs are covering the circular electrodes
and hold them with the rest of your hands.
Do not press the electrodes with the fingernails: fingernails may damage the electrodes and
cause inaccurate results.
B. How to stand on foot electrodes
(1) Bare feet must be in contact with the electrode foot pads.
(2) First, place the heel on the circular electrode.
(3) Place sole on the elliptical electrode surface.
6. Proper Posture
<Wrong posture> <Right posture>
Chapter 2 Management & Results Description 7-8

inbody 230 Specifications

General

Age Range	3 ~ 99 years
Frequency	50kHz, 250kHz
Weight Range	10kg ~ 250kg
Impedance Measurement	Multi-frequency (5kHz, 50kHz, 250kHz)
Display	LCD
Electrode Type	8-point tactile electrode system
Power Supply	AC 100-240V, 50/60Hz
Operating Conditions	Temperature: 10°C ~ 40°C, Humidity: 30% ~ 75%
Measurement Method	Bioelectrical Impedance Analysis (BIA)