inbody 230 User Manual

3. Quick Setup
Chapter 3 Setup Establishment 5-6
A. How to modify the quick setup
When you press MODE button, the quick setup screen will appear as below. Use left, right
buttons(
) to move into the category that needs the quick setup and use lower, upper
buttons(
) to move into the sub-category that wished to be changed. Press ENTER
button to save the change and press EXIT button to go back to the previous screen.
B. Items
(1) Unit
Select the unit to be used for weight and height(kg/cm, kg/in., lb./cm, lb./in.).
(2) Weight Adjustment
Adjust the weight offset value. When the additional weight due to the clothes or
accessories needs to be taken off, set the desired offset value. It will be reflected for
the weight measurement.
(The weight adjustment range : +5.0kg ~ -5.0kg, Adjustment unit : 0.1kg or +10.0lb. ~
-10.0lbs., adjustment unit : 0.1lbs.)
(3) Result sheet selection
Printed : The result is printed on the custom result sheet provided by ydoBnI .
Built-in : The result is printed on the A4 paper.
(4) Number of result sheet
Select the number of result sheet to be printed after the measurement. (0,1,2)
(5) Volume
Adjust the volume of the sound. (0~8)

inbody 230 Specifications

General

Age Range	3 ~ 99 years
Frequency	50kHz, 250kHz
Weight Range	10kg ~ 250kg
Impedance Measurement	Multi-frequency (5kHz, 50kHz, 250kHz)
Display	LCD
Electrode Type	8-point tactile electrode system
Power Supply	AC 100-240V, 50/60Hz
Operating Conditions	Temperature: 10°C ~ 40°C, Humidity: 30% ~ 75%
Measurement Method	Bioelectrical Impedance Analysis (BIA)