inbody Dial - Executing the InBody Test

C. Test Instructions
(1) Power ON: Press the dial to turn Power ON.
Height
Weight
Body fat
Muscle
Visceral fat
(2) Enter height: Press the dial to enter height.
When power is ON, the height of the previous user is displayed.
Height
Weight
Body fat
Muscle
Visceral fat
Be sure not to press the footplate while adjusting the dial.
(3) Weight Measurement and InBody Test: Step on the footplate barefoot and stand as shown in the
figure below.
Hold the hand electrodesas previously described.. After finishing the weight measuring, there is a
“toot-toot“ sound and the InBody Test begins. The Test runs for about 10 seconds, It completes
with a with a “Tu-lu-lu“ sound. Once “End” appears on the screen, step down from the footplate.
Enter height for
InBody Test