Mark by Conformity Assessment of Broadcasting and Communication Equipment
Identification Code : MSIP-CRM-BIB-InBodyH20N
Equipment Name : Terrestrial Wireless Equipment (Wireless Equipment for Wireless Data
Communications System)
Model : InBody Dial (W)
Company : InBody Co., Ltd.
Manufacturer/Country : InBody Co., Ltd./Korea
Date of Manufacture : Marked separately
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer could void the user’s authority
to operate the equipment.
“CAUTION : Exposure to Radio Frequency Radiation.
Antenna shall be mounted in such a manner to minimize the potential for human contact during
normal operation. The antenna should not be contacted during operation to avoid the possibility of
exceeding the FCC radio frequency exposure limit.
To Next Page
Loading...
