Incon task sentinel TS-504 User Manual

1 Page 1 - 4 Tank Sentinel Setup Programming Guide
S YSTEM Menu (C ONTINUED ... FROM PREVIOUS PAG E )
SENTINEL (after hours theft monitoring / tank leak detection)
SENTINEL MODE
MODE
SENTINEL MODE
OFF
Use UP/DOWN ▲ ▼ keys to choose mode.
SCHEDULED Press ENTER to accept this data.
Select SCHEDULED to enable Sentinel Mode —
START TIM
SENTINEL START TIME
00.00.00
up to 23.59.59
END TIME
SENTINEL END TIME
00.00.00
up to 23.59.59
DEL DELAY (delay tank delivery reports by minutes)
DELIVERY DELAY
15
(minutes) 1 to 240 minute input range.
Press
ENTER to accept this data.
REP DELIV
REPORT DELIVERIES
Use UP/DOWN ▲ ▼ keys to choose.
Press
ENTER to accept this data.
ENABLED (enabled = yes, report deliveries)
DISABLED (disabled = no, don’t report deliveries)
REP ALARM
REPORT ALARMS
Use UP/DOWN ▲ ▼ keys to choose.
Press
ENTER to accept this data.
ENABLED (enabled = yes, report alarms)
DISABLED disabled = no, don’t report alarms)
REP LEAK
REPORT LEAK TESTS
Use UP/DOWN ▲ ▼ keys to choose.
Press
ENTER to accept this data.
ENABLED (enabled = yes, report leak test results)
DISABLED (disabled = no don’t report leak test results)
REP SCALD (Appears only if an S is present in the TS Part
REPORT SCALD TEST Number (press CHECK and M4 to view OPTIONS)
Use UP/DOWN ▲ ▼ keys to choose.
Press
ENTER to accept this data.
DISABLED (disabled = no, don’t report SCALD leak tests)
ENABLED (enabled = yes, report SCALD leak tests)
Input time in 24 hour format:
00.00.00 = midnight
22.00.00 = 10:00:00 pm
+ 12
(add 12 hours to pm times
from 1 pm to 11:59 pm
)
02.05.00 = 2:05:00 am

Incon task sentinel TS-504 Specifications

General

Brand	Incon
Model	task sentinel TS-504
Category	Measuring Instruments
Language	English