Incon TS-STS - Setup Menu Configuration; System Information Setup; Cold Boot Functionality; Sump Data and Naming

Setup>System menu Continued...
COLD BOOT (Replaces all custom-setup data with default values)
IF YOU CONTINUE, ALL SYSTEM PROGRAMMING
AND DATA WILL BE LOST...
:
PRESS ENTER IF YOU ARE SURE THAT
YOU WANT TO CONTINUE WITH COLD BOOT
Setup>Sumps menu
SUMPS
DATA N = Sump number
SUMP DATA
SUMP 1 Select sump and program new name
SUMP 2
:
SUMP 4
SUMP DATA N
NAME (Rename the sump using a
SUMP NAME N Code-Name for each Sump)
SUMP N code-names can be up to 7
alphanumeric characters long
(e.g. ULD SMP, SUP SMP, DSP 1-2)
Setup Menu
EXIT SYSTEM SUMPS CLK/CAL COM PORTS
Setup>System menu
SYSTEM INFO
SYSTEM ID (customize the Site ID information)
LINE 1
LOCATION LINE 1 (input 24 characters Max)
INCON Enter the Business Name
LINE 2
LOCATION LINE 2 (input 24 characters Max)
INTELLIGENT CONTROLS INC Enter other Business data
LINE 3
LOCATION LINE 3 (input 24 characters Max)
P.O. BOX 638 Enter the Street Address
LINE 4
LOCATION LINE 4 (input 24 characters Max)
SACO ME 04072 Enter the City and Zip code
LINE 5
LOCATION LINE 5 (input 24 characters Max)
1-800-984-6266 Enter the Business Number
NO. SUMPS (enter total number of sumps [4 max.])
NUMBER OF SUMPS
1
SUMP TST (sump leak test, start time + leak limit)
START TIME (Do not set when tests are started from the front panel)
SUMP TEST START TIME Tests are 15 minutes in length
00.28.00 (12:28 am in 24 hour format)
Input time in 24 hour format...
Add 12 to pm times from 1 to 11:59 pm
LEAK LIM
LEAK LIMIT
0.002
(There is a fixed threshold of .002 level units.)
NOTE: The Leak Limit Threshold of 0.002 is not
an adjustable setting.This is a fixed value.
Pg 5