Incon TS-STS - Clock;Calendar and Console Operation; Clock and Calendar Settings; Setting Time and Date; Setting System Day

Leak Testing /
Console Operation
Setup>Clk/Cal menu
CLOCK/CALENDAR
DAY SAV
DAYLITE SAVINGS
ENABLED Enable = allows daylight savings time changes
DISABLED Disable = does not
TM STYLE Select the time style for displays & reports
TIME STYLE
12 HOUR
24 HOUR
DT STYLE Select the time style for displays & reports
DATE STYLE
MM/DD/YY
DD/MM/YY
YY/MM/DD (YY = Year, MM = Month, DD = Day)
SET TIME Input current time in 24 hour format
SET SYSTEM TIME Two digits are required, use leading
HH:MM:SS zeros before single digits
(e.g. input 05 not 5) Add 12 to p.m. times
from 1 to 11:59 p.m.
SET DATE Input current DATE
SET SYSTEM DATE
YYYY:MM:DD (YYYY = year, MM = Month, DD = Day)...
2 digits are required for month and day –
use leading zeros before single digits
(e.g.. input 04 not 4)
SET DAY
SET SYSTEM DAY OF WEEK Select the current day
SUNDAY
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
— ❖ —
3
SYSTEM SUMP
OKAY OKAY
SYSTEM SUMP
WARNING OKAY
SYSTEM SUMP
NO PAPER OKAY
SYSTEM SUMP
OKAY OKAY
SYSTEM SUMP
OKAY TEST
LEVEL SUMP 1 SUMP 2 SUMP 3 SUMP 4
INCHES 2.01 3.09 1.76 3.12
SELECTFUNCTION 10:39:08 AM 10-29-2001
DISPLAY PRINTER
SYSTEM SUMP
OKAY LEAK
Displays:
1.) Normal Display
2.) Press the Check key
to check the time and
date.
3.) The System –
Warning message
alternates with the
No Paper (if out).
Replace printer
paper before starting
sump leak tests.
4.) Press the Level key
to check the test fluid
level in sumps (sumps
can’t be leak tested if
empty).
5.) Press the Test key at
the keypad & and the
menu select key
(M1 M2 or M3) and
follow instructions to:
• Show the Status of
tests including Start
time / date
• Start tests, and to
• Abort leak test(s)...
Okay & Testing are
alternately displayed
when a sump leak
test is running.
SELECT LEAK TEST OPTION
STATUS START ABORT
M1
LEFT
M2
RIGHT
M3 M4
Pg 6