EasyManua.ls Logo

Indesit DBE 2B19 A X - User Manual

Indesit DBE 2B19 A X
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EN
1
APPLIANCE
PRODUCT DESCRIPTION
1. Upper rack
2. Foldable aps
3. Upper rack height adjuster
4. Upper spray arm
5. Lower rack
6. Cutlery basket
7. Lower spray arm
8. Filter Assembly
9. Salt reservoir
10. Detergent and Rinse Aid dispensers
11. Rating plate
12. Control panel
1 2
43 5 6 7
8
9
10
1. On-O/Reset button with indicator light
2. Program selection button with indicator light
3. Half Load button with indicator light
4. Rinse Aid rell indicator light
5. Salt rell indicator light
6. Program indicator lights
7. Delay indicator light
8. Delay button with indicator light
9. Push&GO button with indicator light
10. Start/Pause button with indicator light / Drain out
DAILY REFERENCE
GUIDE
CONTROL PANEL
Before using the appliance carefully read Safety Instructions.
0000 000 00000
Service:
1
2
3
4
5
6
10
12
7
11
9
8
THANK YOU FOR BUYING A INDESIT PRODUCT.
In order to receive a more complete assistance, please
register your appliance on: www.indesit.com/register
You can download the Safety Instructions and the
User
Manual, by visiting our website docs.indesit.eu
and
following the Instructions on the back of this booklet.

Questions and Answers

  • B
    Bradley JonesAug 12, 2025
    Why are dishes not cleaned properly in my Indesit Dishwasher?
    • A
      Andrew PetersAug 12, 2025
      If your dishes aren't getting clean in your Indesit Dishwasher, it could be due to several reasons. Check that the crockery is arranged correctly so the spray arms can rotate freely. Ensure you're selecting an appropriate wash cycle for the load. Make sure that the cap on the rinse aid compartment has been shut correctly. Also, verify that the filter is not soiled or clogged, and that the salt reservoir is filled.
  • B
    bishopkendraAug 16, 2025
    How to fix Indesit Dishwasher drain issues?
    • D
      Dylan CarterAug 16, 2025
      If you're having drain issues with your Indesit Dishwasher, first ensure the wash cycle has finished. Check that the drain hose isn't bent, the sink drain pipe isn't blocked, and the filter isn't clogged with food residues. Clean the sink drain pipe and the filter if necessary.
  • N
    Nicholas MillerAug 20, 2025
    Why Indesit DBE 2B19 A X Dishwasher does not fill the water rapidly?
    • R
      ralvarezAug 20, 2025
      If your Indesit Dishwasher isn't filling with water rapidly, check that there is water in the water supply and that the tap is fully open. Also, inspect the inlet hose to ensure it isn't bent. Finally, check the sieve in the water inlet hose for clogs and clean it if necessary. After these checks, turn the dishwasher off and on, and restart a new program.
  • J
    James TaylorAug 23, 2025
    How to turn off the salt indicator on Indesit DBE 2B19 A X Dishwasher?
    • L
      Lonnie WallaceAug 23, 2025
      If the salt indicator is lit on your Indesit Dishwasher, it likely means the salt reservoir is empty. Refill it with salt. Note that the indicator may remain lit for several wash cycles even after refilling. Also, ensure you adjust the water hardness setting appropriately.
  • S
    Steven DavidAug 27, 2025
    What to do if my Indesit DBE 2B19 A X doesn't respond to commands?
    • J
      Johnny WalkerAug 27, 2025
      If your Indesit Dishwasher isn't responding, first, ensure it's properly plugged into the socket. If there was a power outage, press the START/Pause button to resume the cycle, as it won't restart automatically. Also, make sure the dishwasher door is fully closed until you hear a 'click'. If the door was opened for more than 4 seconds during a cycle, close it and press START/Pause. As a last resort, try switching the appliance off and on again after a minute, or unplug it for a minute and then plug it back in.
  • J
    Jennifer Mcgee DVMAug 31, 2025
    What to do if the rinse aid indicator is lit on my Indesit DBE 2B19 A X?
    • N
      Nathan Li MDAug 31, 2025
      If the rinse aid indicator is lit on your Indesit Dishwasher, it means the rinse aid dispenser is empty. Refill the dispenser with rinse aid. The indicator may remain lit for several wash cycles after refilling.
  • S
    shannon35Sep 3, 2025
    Why is my Indesit DBE 2B19 A X Dishwasher making noise?
    • L
      loweryamandaSep 3, 2025
      If your Indesit Dishwasher is making noise, it could be due to the dishes rattling against each other; make sure to position the crockery correctly. Alternatively, an excessive amount of foam may have been produced because the detergent was not measured out correctly or is unsuitable for dishwashers. Restart the dishwasher by pressing the DRAIN button and run a new program without detergent.
  • A
    Andrew JohnsonSep 7, 2025
    What to do if my Indesit DBE 2B19 A X stops the cycle prematurely?
    • T
      Theresa RiversSep 7, 2025
      If your Indesit Dishwasher stops its cycle prematurely, check if the drain hose is positioned too low or is siphoning into the home sewage system; make sure the end of the drain hose is at the correct height. Also, check the water supply for leaks or other issues that might be letting air inside.

Indesit DBE 2B19 A X Specifications

General IconGeneral
TypeFreestanding
Noise Level49 dB
Wash Programs6
Height85 cm
Width60 cm
Depth60 cm
Drying SystemStatic
Noise Emission ClassC
Washing ClassA
Drying ClassA
Delay StartYes
Half Load OptionYes
Cycle Time190 minutes
Water Consumption per Cycle11 L
Annual Water Consumption3080 liters
Number of Place Settings13 place settings

Related product manuals