To Next PageTo Next PageHow to fix Indesit Dishwasher that won't start?
If your Indesit Dishwasher isn't starting, check these potential issues: Ensure the plug is correctly inserted into the electrical socket and that there is power in your house. Verify that the dishwasher door is completely closed. Also, check if a delayed start has been programmed.
Why are my dishes not clean after using Indesit DIF 04 Dishwasher?
If your dishes aren't getting clean in your Indesit Dishwasher, consider these possibilities: Avoid overloading the racks and ensure proper arrangement of crockery. Check that the sprayer arms can move freely. Select a more intensive wash cycle if the current one is too gentle. Make sure you're using the correct amount and type of detergent. Ensure the rinse aid compartment lid is properly closed. Inspect the filter for dirt or blockages, and check the refined salt level.
What to do if no water drains from Indesit DIF 04 Dishwasher?
If water isn't draining from your Indesit Dishwasher, it could be due to several reasons: First, make sure the dishwasher cycle has finished. Check the water outlet hose for any bends. Inspect the drain duct for blockages. Also, the filter might be clogged with food residues.
Why Indesit DIF 04 Dishwasher not drying properly?
If your crockery isn't drying properly in your Indesit Dishwasher, it could be due to the rinse aid being used up or the dosage being too low. Check the rinse aid dispenser setting; it might not be high enough. Also, a wash cycle without a drying programme might have been selected.
Why my Indesit DIF 04 does not start?
Your Indesit Dishwasher might not start because the plug isn't properly inserted or there's no power. Ensure the plug is correctly in the socket and check your home's power supply. Also, make sure the dishwasher door is completely shut. A delayed start might also be programmed.
Why Indesit DIF 04 Dishwasher leaves white film on dishes?
If your dishes and glasses have a white film or limescale after washing in your Indesit Dishwasher, it might be because the level of refined salt is low, or the dosage setting isn't right for your water hardness. Check that the salt dispenser lid is properly closed and that you haven't run out of rinse aid or that the dosage is too low. Also, consider that the crockery might be made from non-stick material.
What to do if Indesit DIF 04 Dishwasher shows shut off tap alarm?
If no water is entering your Indesit Dishwasher and the tap alarm is sounding, first check if there is water in the mains supply. Also, inspect the water inlet hose for any bends. Turn on the tap; the appliance should start after a few minutes. If beeps activated the appliance lock, switch off the machine using the ON/OFF button, turn on the tap, and switch the machine back on after 20 seconds. Then, re-programme the machine and restart the wash cycle.
Why Indesit DIF 04 Dishwasher leaves streaks on glasses?
If your dishes and glasses are streaked or have a bluish tinge after being washed in your Indesit Dishwasher, it's likely that the rinse aid dosage is too high.
How to fix Indesit DIF 04 water inlet hose alarm?
If your Indesit Dishwasher shows a water inlet hose alarm or indicates a blocked water inlet filter, switch off the appliance using the ON/OFF button. Shut off the water tap to prevent flooding and remove the plug from the electrical socket. Check the water inlet filter for blockages caused by impurities.
How to clean dishes properly in Indesit Dishwasher?
If your dishes aren't getting clean in your Indesit Dishwasher, avoid overloading the racks and ensure crockery is arranged properly so the sprayer arms can move freely. Select a more vigorous wash cycle and use the correct amount of a suitable detergent. Make sure the lid on the rinse aid compartment is shut correctly, the filter is clean, and the refined salt level is adequate.
General| Door color | Not applicable |
|---|---|
| Appliance placement | Fully built-in |
| Control panel color | White |
| Washing class | A |
| Noise level | 55 dB |
| Number of place settings | 12 place settings |
| Number of washing programs | 4 |
| Water consumption per cycle | 16 L |
| Energy consumption per cycle | 1.05 kWh |
Weight and Dimensions| Depth | 570 mm |
|---|---|
| Width | 595 mm |
| Height | 820 mm |
Guidance on correctly placing and leveling the dishwasher for stability and optimal operation.
Instructions for qualified technicians on connecting the appliance to water and electricity sources.
Details on connecting the water inlet hose to cold or hot water supply points, including pressure requirements.
Explanation of the dishwasher's system to prevent floods, including the 'New Acqua Stop' feature.
Instructions for connecting the drain hose to a suitable duct or sink, ensuring proper height and no immersion.
Color coding and wiring instructions for connecting the appliance's mains lead to an alternative plug.
Detailed steps and color code mapping for connecting wires to a new plug terminal.
Explanation of the buttons, indicator lights, and functions on the dishwasher's control panel.
Step-by-step guide to turning on the dishwasher, selecting cycles, and starting a wash program.
Important safety instructions for domestic use, installation, operation, and maintenance of the appliance.
Solutions for the malfunction where the dishwasher fails to power on or start a cycle.
Troubleshooting steps for issues related to water not draining, including checks on hoses and filters.
Causes and solutions for dishes not being clean, including filter checks, rack loading, and detergent use.
Resolving alarms indicating no water entry, bent hoses, or the tap not being turned on.
Procedure for resetting the appliance after a water loading solenoid valve malfunction alarm.
Actions to take for alarms related to water inlet hose issues or a blocked water inlet filter.
