S
Stephanie EstradaAug 16, 2025
What to do if my Indesit DIFP 48 doesn't take in water and beeps?
- CChad MitchellAug 16, 2025
If your Indesit Dishwasher is beeping and not taking in water, it could be due to a few reasons. First, ensure that there is water in the mains supply by turning on the tap; the appliance should start after a few minutes. Also, the appliance lock may have been activated. To resolve this, switch off the dishwasher using the ON/OFF button, turn on the tap, and then switch the appliance back on after 20 seconds. Reprogram the appliance and restart the wash cycle.