What to do if Indesit Dishwasher won't load any water and has flashing lights?
- KKimberly ReyesAug 15, 2025
If your Indesit dishwasher won't load water and shows flashing lights, check the following: First, ensure there is water in the mains supply and that the tap is fully open. Inspect the water inlet hose for any bends that might be restricting water flow. Also, the filters or drain duct might be clogged and require cleaning. After checking and cleaning these components, switch the dishwasher on and off, then start a new wash cycle. If the issue continues, turn off the water tap, remove the plug, and it is recommended to call the Service Centre.