Indesit IWDE126 User Manual

www.sacoapartments.com
Operating Instructions – Washer Dryer Indesit IWDE126
Control Panel
Detergent dispenser: To add detergent and
fabric softener.
LEDS: To find out which wash cycle phase is
under way.
If the Delay Timer function has been set
the time left until the programme starts
will be indicated.
• Drying knob: To set the desired drying cycle.
• Function buttons: To select the functions available. The button corresponding to the function selected
will remain on.
• Temperature knob: To set the temperature or the cold wash cycle.
• Start/Reset button: To start the programmes or cancel any incorrect settings.
• On/Off Door Lock Led: To find out whether the Washer–dryer is on and if the appliance door can be
opened.
• On/Off button: To turn the Washer–dryer on and off.
• Programme knob: To select the wash programmes. The knob stays still during the cycle.
Standby mode
This washing machine in compliance with new energy saving regulations is fitted with an automatic standby
system which is enabled after about 30 minutes if no activity is detected. Press the ON/OFF button briefly and
wait for the machine to start up again.
LEDS
The LEDS provide important information:

Indesit IWDE126 Specifications

General

Type	Washer/Dryer
Load Capacity (Washing)	6 kg
Load Capacity (Drying)	4 kg
Spin Speed	1200 rpm
Energy Efficiency Class	B
Loading Type	Front Loading
Energy Efficiency Class (Washing & Drying)	B
Energy Rating	B
Number of Programs	16
Noise Level (Spinning)	76 dB
Color	White
Dimensions (H x W x D)	85 x 59.5 x 53.5 cm

Summary

Control Panel Overview

Key Components and Functionality

Explains the detergent dispenser, status LEDs, and the function of various operational knobs and buttons.

Standby Mode Operation

Delay Timer Functionality

Delay Timer LED Indicators

Details how LEDs indicate the set delay time and the remaining delay before the programme starts.

Cycle Phase LED Indicators

Describes how LEDs illuminate to show the current wash cycle phase.

Function Button Indicators

Explains that function buttons also act as indicators when a function is selected.

Programmes and Settings

Programme Table Overview

Details various wash programmes, including fabric type, temperature, cycle length, and description.

Starting and Managing Cycles

Starting a Programme

Step-by-step guide on how to turn on, load, and start a wash or dry cycle.

Setting Wash Temperature

Instructions on using the temperature knob to select wash temperature or cold wash.

Setting the Drying Cycle

Guidance on selecting drying type based on time or damp level of clothes.

Drying Load Recommendations

Drying Load Capacities

Provides a table with recommended drying load capacities for different fabric types and dryness levels.

Dry Only Operation

Instructions for performing a dry-only cycle using specific programme and drying knob settings.

Available Functions

Function Descriptions and Compatibility

Details functions like Delay Timer, Easy Iron, Extra Rinse, and Spin Speed reduction with their effects and compatibility.