MMAAIINNTTEENNAANNCCEE
CCAARREE AANNDD MMAAIINNTTEENNAANNCCEE
To clean the display shell, use a soft cloth with mild soap and
water. Do not use harsh or abrasive cleaners. For best results, use
a micro-fiber towel to clean the screen. Window cleaner or alcohol
may also be used.
NOTICE
Immediately clean off any gasoline that splashes onto the display.
VVEEHHIICCLLEE SSTTOORRAAGGEE
When preparing the vehicle for storage make sure the ignition
switch is in the OFF position to prevent battery drain and
diminished battery life.
SSPPEEEEDD LLIIMMIITTAATTIIOONN
Various aspects of the display such as phone contacts and call logs
may be unavailable while driving at high speeds.
UUPPDDAATTEE SSOOFFTTWWAARREE
For the latest software for INDIAN MOTORCYCLE Ride Command,
go to:
https://ridecommand.indianmotorcycle.com.
The display software can be updated by connecting a USB stick
containing the latest software version to the USB port located on
the bottom left of the display. The Update Software menu in
Settings will list any available updates on the USB stick. Choose the
correct version and wait for the update to complete before
removing the USB stick. The touchscreen display will automatically
restart when software is updated.
IMPORTANT
It is recommended to connect your bike to a trickle charger
before updating software or maps. Refer to your Owner’s Manual
for the trickle charger location.
SSOOFFTTWWAARREE UUPPDDAATTEESS
For software update, INDIAN MOTORCYCLE recommends using a
SanDisk® or similar USB flash drive with a minimum of 1GB in
available memory, formatted using the exFAT® file system. For
best results remove all files from the flash drive before starting the
update process.
31
MAINTENANCE
To Next Page
Loading...