Inepro Metering – PRO Series 1 – 9
5.6 Dimensions
Height without protection cover 92,4 mm
Height 141 mm
Width 70 mm
Depth 63 mm
Max diameter power connection clamps 25 mm
2
(flex core)
35 mm
2
(solid core)
Weight 0.39 Kg (net)
CAUTION
• Turn off and if possible lock all sources supplying the energy meter and the equipment that is
connected to it before working on it.
• Always use a properly rated voltage sensing device to confirm that power is off.
WARNING
• The installation should be performed by qualified personnel familiar with applicable codes and
regulations.
• Use insulated tools to install the device.
• A fuse, thermal cut-off or single-pole circuit breaker should be fitted on the supply line and not
on the neutral line.
To Next Page
Loading...
