EasyManuals Logo

iNetVu 7000 Series Instruction Manual

iNetVu 7000 Series
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
INETVU® MOBILE SYSTEM QUICK START BEACON RECEIVER BR300L
C-COM Satellite Systems Inc. Page 2
1.1 Safety and Warning Information
For your safety and protection the following important safety information should be reviewed before
installation, configuration and use of the iNetVu Satellite Platform System and Modem equipment. It is
also recommended to read the manual in its entirety prior to setup and operation.
Warning: The following general safety precautions must be observed during all phases of setup and
operation of this equipment. Failure to comply with these precautions or with specific warnings
elsewhere in this documentation violates safety standards of design, manufacture and intended use of
the equipment. C-COM Satellites Systems Inc. assumes no liability for the customer’s failure to comply
with these requirements.
This situation or practice might result in property or
equipment damage. Ensure Sensor and Motor cables are
connected prior to powering on 7000 Series Controller. Do not
connect or disconnect cables once controller has been
powered on. It is recommended that controller is properly
grounded at all times.

Other manuals for iNetVu 7000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the iNetVu 7000 Series and is the answer not in the manual?

iNetVu 7000 Series Specifications

General IconGeneral
BrandiNetVu
Model7000 Series
CategoryController
LanguageEnglish