Infa Group Infa Secure CS8813 - Using Inbuilt Harness

30
Insert either tongue into the buckle until a “CLICK” is
heard. Ensure secure engagement by pulling the
harness strap (refer Figure 5).
Step 4:
Using Inbuilt Harness
Use
Infant Seat
IMPORTANT
!
If no “Click” can be heard or a secure engagement
cannot be achieved refer to “Cleaning Buckle
Harness” page 57.
Figure 5
Figure 6
1
2
“CLICK”
Step 5:
WARNINGS
!
Figure 7
PULL TO
TIGHTEN
Harness
Adjuster Strap