Infa Group Infa Secure CS8813 - Page 55

46
Installation
Child Car Seat
Installing Using Vehicle Seatbelt
Store any excess webbing, from the
top tether strap in the storage pocket
provided on the restraint (refer to Figure 9).
Tether Storage
Step 5:
Step 6:
FOLLOWING THE INSTALLATION OF
THE CHILD RESTRAINT A SMALL
AMOUNT OF MOVEMENT IS DEEMED
ACCEPTABLE.
NOTE
CAUTION: CHILDREN CAN BE
INJURED OR RESTRAINTS AND
TOP TETHER STRAP DAMAGED
BY UNSECURED CARGO IN A
COLLISION. SECURE OR
REMOVE HAZARDOUS CARGO
BEFORE USING THIS CHILD
RESTRAINT.
Always secure the loose end of the
top tether strap to prevent it
hanging out of the car or being
accessible by the child.
ADJUSTER
ATTACH
PULL TO
TIGHTEN
Tilt
Pull to
Lengthen
Pull to Tighten
Figure 9Figure 10
Figure 9Figure 9
Figure 11
Storage
Pocket