59
Accessories
PADDED INSERTS
The padded inserts are designed to add extra
comfort for your child.
Press to release Buckle tongues.
Open the “press studs”and position the
padded insert in the restraint.
Pass the harness straps over the insert and
connect the “press studs”.
Pull the Buckle and leg straps through the slot
or opening in the insert.
Connect both tongues into the buckle.
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Follow the instructions covering the use of accessories provided with this child
restraint or spare parts provided by InfaSecure for this restraint.
IMPORTANT
!
Use of unauthorised aftermarket accessories (i.e items not provided in this
box with the child restraint), can reduce the safety provided by the child
restraint and may cause injury or death.
BUCKLE PAD
The buckle pad is designed to add extra
comfort for baby or child.
Position the buckle pad behind the buckle
and clip in the front. The release button
should be clearly visible.
Step 1:
Press Stud
Type Pads.
“press
studs”
To Next Page
Loading...